ENVIRO-KOTE

Blue River Coatings ENVIRO-KOTE is a two-component clear coat treatment system designed for Original Equipment Manufactures (OEM) to protect the substrate over which it is applied from oxidation and abrasion. ENVIRO-KOTE, when applied properly, will not yelllow, chip, crack or peel. If gouged or damaged, the finish will not experience creepage and is repirable. The product is designed to coat surfaces that require a hard, flexible, and chemical resistant thin coating that can withstand temperatures of 2,000°F. ENVIRO-COAT offers excellent coverage, durability, and oxidation protection as well as being a low VOC and EPA compliant coating. ENVIRO-KOTE is applied clear and will dry clear.

CHARACTERISTICS
Excellent Hardness
Excellent Flexibility
Excellent Impact Resistance
Excellent Adhesion, Mar, And Abrasion Resistance
Excellent Heat Tolerance (2000°F+ With No Visible Affects)
Excellent Chemical Resistance
Available In Satin To Gloss Finish
Non-photochemically Reactive
Application by spraying, dipping, wiping, or brushing
Little to no irritating odor
Solvent is used for clean-up
Non-hazardous
Air dry or force curing preferred
Product life of 24 hours
No special safety equipment required

AIR QUALITY DATA
Free of lead and cromates
VOC (Volatile Organic Compounds) 2.8 lb/gal; 336 gm/ltr when catalyzed

USES
Brass
Aluminum
Copper
Ceramic Tile and Porcelain
Welding Tips/Nozzles
Plastics
Plexiglas
Topcoat For Paints
Topcoat For Powder Coating

PHYSICAL DATA
Liquid, clear
Specific Gravity: >1
Evaporation Rate: Slower than either
VOC: 2.8 lb/gal; 336 gm/ltr
% Solid by weight: 25%
% Solid by volume: 22%
Weight per gallon: 8.34 lbs.
Flash Point: 150°F CC Part A
Flash Point: 47°F CC Part B

Blue river Coatings EVIRO-KOTE is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be dried and sent to a "Class B" landfill. Please follow local and state regulations in the proper use and disposal of this product.